Step 2
Step 3
Step 4
3-6
Begin by mounting the top (uppermost) module, either the sponsor panel
module if applicable or the top line of the scoreboard module. Position the
scoreboard mounting brackets into the top and bottom channel of the
scoreboard module (or sponsor panel module), see Fig. 15.
If a third module is applicable, leave a 9 1/2 inch separation between
modules for the signage, and mount the module as before.
Mount the black ABS sign panel.
To mount top sign panels, place the panel in the top outer edge of the
scoreboard groove. Position sign brackets at each of the pre-drilled hole
positions on the sign panel. Secure the brackets in the top frame by twist-
ing the lock in place. Tilt the sign back to engage the bracket fingers in the
sign panel holes. Thread wire nuts onto the top fingers protruding from
the sign panels, see Fig. 16 below.
Figure 16
Or, if the signage panel mounts between two modules, slide the signage
into the channel between the top and bottom modules, see Fig. 17 below.
Figure 17
Comentários a estes Manuais