Directed Electronics 381 Series Guia de Instalação descarregar pdf (Página 27)

No additional parts are required to add the optional VRS feature. However for the VRS

feature to be effective, the

8618 starter kill relay must be installed. The VRS feature can be activated with the remote transmitter and deacti-

vated with the Valet switch (see System Features Learn Routine section of this guide).

To arm VRS

1. Turn the ignition to the ON position.

2. Press the ARM button for 1 second.

The parking light will flash once and the siren will chirp once to confirm that the VRS system is armed and will enter

the trigger sequence next time a door is opened then closed.

To disarm VRS (before the siren starts to chirp):

1. Turn the ignition to the ON position.

2. Press the ARM button for 1 second.

The parking lights will flash twice and the siren will chirp twice to confirm that the VRS

system is disarmed.

To disarm VRS

(after siren has started to chirp):

1. Turn the ignition to the ON position.

2. Press and release the Valet

/Program switch. If programmed for Ghost Switch only mode,

press the Ghost Switch the programmed number of times to disarm the VRS. This step

must be performed within 10 seconds of turning the ignition switch on.

NOTE: When the VRS is used, it is highly recommended to program the unit for Ghost Switch only dis-

arm mode. For a detailed explanation of the VRS triggered sequence, refer to the Vehicle

Recovery System section of the Owner's Guide.

When the security system is powered back up, it will come back to the same state it was in when power was lost.

For example, if power is disconnected during its full trigger sequence, when power is reconnected to the unit it will

remain in the full trigger sequence. If power is disconnected while the unit is disarmed, it will power back up dis-

armed. This also applies to the VRS sequence. If the unit loses power at any time during the VRS sequence, when

the unit is powered back up it will automatically go to the VRS full trigger sequence.

OPTIONAL VEHICLE RECOVERY SYSTEM (VRS

) INSTALLATION

RAPID RESUME LOGIC

1 2 ... 22 23 24 25 26 27 28

Sem comentários

Directed Electronics 381 Series Guia de Instalação Página 27