Directed Electronics 381 Series Guia de Instalação descarregar pdf (Página 17)

SYSTEM FEATURES LEARN ROUTINE

™

The System Features Learn Routine

™

dictates how the unit operates. Due to the number of steps, they have been

broken up into three menus. It is possible to access and change any of the feature settings using the Valet

/Program

switch. However, this process can be greatly simplified by using the optional DEI Bitwriter or Personal Computer

Interface, P/N 996T. Any of the settings can be changed and then assigned to a particular transmitter, up to four, a

feature called

Owner Recognition

. Each time that particular transmitter is used to disarm the system, the assigned

feature settings will be recalled. Owner Recognition is only possible when programming the unit via the 996T or the

998T DEI Bitwriter.

Using the optional DEI Bitwriter or PC Interface, the learn routine may be locked. Make sure the learn routine is

unlocked before programming features. If the siren generates one long chirp when attempting to program the unit,

the learn routine is locked and must be unlocked using the DEI Bitwriter or PC before proceeding.

To enter the System Features Learn Routine

™

1. Open a door. (The H1/5 GREEN wire or the H1/7 VIOLET wire must already be connected.)

2. Turn the ignition on, then back off. (The YELLOW wire, H1/9 must already be connected.)

3. Select a Menu: Press and HOLD the Valet

/Program switch:The Valet

/Program switch must be

plugged into the blue port. After three seconds the siren will chirp once indicating entry to the Basic

Features Menu. If this is the menu you wish to access, release the button and go on to step 4. If

the button is not released, you will jump to the next menu and the siren will chirp twice. There are

three menus possible. Once you have selected the desired menu, release the program button.

4. Select a Feature: Press and release the Valet

/Program switch the number of times corre-

sponding to the step you wish to change. For example, to access the third feature, press and

release three times. Then press the button once more and HOLD it. The siren will chirp the num-

ber of times equal to the step you have accessed.

5. Program the Feature: While holding the Valet

/Program button, you can toggle the feature on

and off using the remote transmitter. Pressing the button that arms the system will select the one

chirp or default setting. Pressing the button that is assigned to Channel Two (or the disarm only

button when in OEM configuration, see Transmitter Programming), will select the two chirp setting.

NOTE: The Ghost Switch input (Feature 2-5) and the Channel Six timed output (Feature 3-5) have

five possible settings each. Pressing Channel Two will toggle through all the possible settings.

6. Release the Valet

/Program switch.

Once the feature is programmed:

• Other features can be programmed within the same menu.

• Another menu can be selected.

• The learn routine can be exited if programming is complete.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comentários a estes Manuais

Sem comentários

Directed Electronics 381 Series Guia de Instalação Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Alarmes para automóveis Directed Electronics 381 Series