
10 SRD991 PSS EVE0105 E-(en)
SRD991 with HART communication
SRD991-xHxxxx
Signal Input .............Twowiresystem
Reverse polarity protection. . standard feature
Signal range ............4to20mA
Operating range..........3.6to21.5mA
Input voltage ............DC12...36 V
1)
(unloaded)
Load ..................420Ohms,8.4Vat20mA
Communication signal .....HART,1200 Baud, FSK
(Frequency Shift Key)
modulated on 4 to 20 mA
0.5 Vpp at 1 kOhm load
Input impedance Zi........Z=320Ohms
for ac voltage 0.5 to 10 kHz with < 3 dB non-linearity
Cable capacity and inductance see HART standard
specifications. (e.g. C < 100 nF).
Impedance of other devices at the input (parallel or serial)
must be within HART spec.
Applications without communication require not to exceed
input capacitance parallel to the input not higher than 100 µF.
Start-uptime ............approx. 3 sec
Interruption time without power down:
withLCD .............typ.80ms
2)
1) On request we can specify higher voltage limits
2) Worst case conditions 4-20 mA, with position feedback option, i/p-output
with max. current
Configuration
The SRD991 can be configured via HART by any host
system whatever is a PC with a HART Modem, Hand Held
Terminal or a DCS.
LOCAL (by means of local key pad and LCD display)
See page 6
DTM (Device Type Manager)
Foxboro is a leading company in term of FDT-DTM
technology
http://www.fdtgroup.org/product-catalog/certified-dtms?com
pany=Foxboro+Eckardt+GmbH&field_device_type_value_
many_to_one=All&field_protocol_value_many_to_one=All
Therefore we provide a DTM fully certified for its inter-
operability and with the state-of-the-art presentation and
diagnostics features.
The DTM can be downloaded from our homepage
http://www.foxboro-eckardt.eu/download/FDT-DTMselector.
html
DD (Device Description) and EDD (Enhanced
Device Description)
In case the host system is not supporting the FDT-DTM
technology, you can download the DD and/or EDD from our
homepage
http://www.foxboro-eckardt.eu/download/EDDselector.html
Comentários a estes Manuais