Directed Electronics VS102 Especificações descarregar pdf (Página 26)

Peripheral Interfacing Options with Vocollect Voice Appliances Page 18

1-Dec-2010 Version 4.0

2. Assure that the BarcodePort parameter is set to BT_SCAN if the device is a scanner

or the PrinterPort parameter is set to BT_PRINT if the device is a printer in the

advanced settings of the task package

3. Access the individual Talkman device properties, enable Bluetooth and set the

Talkman to initiate a connection with the device

4. Have the specific Bluetooth address of the Bluetooth device entered in the Talkman

Bluetooth setup

5. The correct security code (if security on the device is enabled) should also be entered

Note: VoiceConsole also has the ability to import a list of connected devices and set up those

connections. This “bulk pair” option may be useful in some situations.

Connection initiated by the Bluetooth Device

It is usually more advantageous to allow a device to actively pair with the Talkman as

opposed to having Talkman initiate the pairing. This permits any Talkman to be used with

any device. Typically this can be easily done with most scanners, however printers may not

have the capability to outbound pair.

To enable Talkman to listen for a connection from a device, using VoiceConsole:

1. Set the parameters “Bluetooth_IsEnabled” and “Bluetooth_IsDiscoverable” to

“TRUE” in the advanced settings of the device profile.

2. Assure that the BarcodePort parameter is set to BT_SCAN if the device is a scanner

or the PrinterPort parameter is set to BT_PRINT if the device is a printer in the

advanced settings of the task package

3. If using a scanner, print the appropriate barcode, or sequence of barcodes, to program

the scanner to associate with the particular Talkman to which it is to be paired and

scan the barcode(s) with the scanner. If using another device other than a scanner,

check its documentation and follow the recommended sequence to pair the device.

The two devices should then pair

Hint: If the scanner can be paired with a single barcode, that sequence can be

printed and placed on the Talkman as a label. Workers who need to “pair” the

scanner can then simply pickup the Talkman and scan this code with the scanner to

pair it to the Talkman.

Note: If a scanner is used in “initiator” mode, it is good practice to unpair it when it

is no longer being used. This is because when an initiator device becomes unpaired,

such as when Talkman is turned off, the initiator will try to re-pair by “paging” or

sending many repeated bursts of Bluetooth radio traffic through the air. This does

have some potential to disrupt other signals, including Wi-Fi. Either pairing the

scanner with its base station or the scanner to an “acceptor” mode will stop this

behavior and decrease the potential for other interference with the wireless network.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Sem comentários

Directed Electronics VS102 Especificações Página 26