Directed Electronics Ready Remote Guia de Instalação Página 14

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 20
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 13
Rev.: 20141114
Platform: DBALL/DBALL2
Firmware: NISS3HT Remote Start Ready (RSR) Installation
© 2014 Directed. All rights reserved.
Page 14
To enter feature programming routine
-
Turn the ignition ON, then OFF.
-
Within 5 seconds, press and HOLD the programming button until the LED turns ON orange (after 3 seconds). Release the
Programming button.
-
The LED will flash green once slowly to indicate the feature number is 1. After a short delay, the LED flashes red rapidly to indicate the
current option of feature 1 (i.e. 1x green followed by 1x red indicates feature 1 is set to option 1). The flashing sequence will repeat
until a new command is entered.
Changing feature options
-
Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature.
-
The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green slowly
the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered.
Accessing another feature
-
Press and release the programming button a number of times to advance from the current feature to the next desired feature.
-
The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly to
indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered.
When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option.
Once a feature is programmed
-
Other features can be programmed.
-
The feature programming can be exited.
Exiting feature programming
-
No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming
sequence.
OR
-
Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the
end of the programming sequence.
Feature Programming
Programming
Button
Ĩ İ Ĭ J ÒǾÑ Pin Keysense Pin Clock Pin Data Pin Brake Pin
ÒQÑǾŎǾ
Pin Pin Lock Pin Unlock Pin
Parking
Lights (+) Pin
M35 2006-2010 Brown/White 4 Brown/Yellow 2 Gray 7 White/Red 6 Pink/Blue 2 Purple 7 (insert pin) 5 (insert pin) 6 Red/Blue 1
Dimmer Switch
Vehicle
PTS Connector Key Port Connector BCM White 15 Pin ConnectorBrake Switch
All connectors are displayed from the wire side.
PTS Wire Pin Keysense Pin Clock Pin Data Pin
Driver Door
Pin Pin Lock Pin Unlock Pin
Parking
Lights (+) Pin Brake Pin
EX35 (Smart Key) 2008-2012 Brown 4 Brown 11 Gray 2 White 3 Lt. Green 39 (insert pin) 37 (insert pin) 15 Red 8B White 2 or 4
EX37 (Smart Key) 2009-2012 Brown 4 Brown 11 Gray 2 White 3 Lt. Green 39 (insert pin) 37 (insert pin) 15 Red 8B White 2 or 4
FX35 (Smart Key) 2009-2012 Lt. Blue 4 Brown 11 Gray 2 White 3 Gray 39 (insert pin) 37 (insert pin) 15 Red 8B White 2 or 4
FX50 (Smart Key) 2009-2012 Lt. Blue 4 Brown 11 Gray 2 White 3 Gray 39 (insert pin) 37 (insert pin) 15 Red 8B White 2 or 4
G25 (Smart Key) 2011-2012 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray 39 (insert pin) 37 (insert pin) 15 Red 8B White 2
G35 (Smart Key) 2007-2009 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray or Red 39 (insert pin) 37 (insert pin) 15 Red 8B White 2
G37 (Smart Key) 2008-2012 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray or Red 39 (insert pin) 37 (insert pin) 15 Red 8B White 2 or 4
370Z (Smart Key) 2009-2012 Brown 4 Red 11 Gray 2 White 3 Gray 39 (insert pin) 37 (insert pin) 15 Red 8B White 2
Altima (Smart Key) 2007-2012 Brown 4 Yellow 11 Green/Orange 2 Orange 3 Lt. Blue 39
Blue/Black
or (insert
pin)
37
Blue/Red or
(insert pin)
15 Red/Blue
8B
Lt. Green or
Red/Green
2
GT-R (Smart Key) 2009-2012 Brown 4 Red 11 Gray 2 Blue 3 Gray 39 (insert pin) 37 (insert pin) 15 Red 8B White 2
Maxima (Smart Key) 2009-2012 Brown 4 Yellow 11 Green/Orange 2 Orange 3 Lt. Blue 39 (insert pin) 37 (insert pin) 15 Red/Blue 8B Lt. Green 4
Murano (Smart Key) 2009-2013 Brown 4 Yellow 11 Lt. Blue 2 Orange 3 Lt. Blue 39 (insert pin) 17 (insert pin) 15 Red 8B Lt. Green 2 or 4
Brake
Switch
Fusebox White
10-pin Connector
Vehicle
PTS Connector Key Port Connector BCM Green 40 Pin Connector
Push-to-Start connector
(-) Push-to-Start
1
4 5 6 7 8
32
(+) Keysense
Clock
Data
Key Port connector
1 2 3 5 6
11
7
(-) Driver Door Pin
(-) Lock/Arm
(-) Lock/Arm
(Murano only)
(-) Unlock/
Disarm
BCM Green 40-pin connector
20 19 18 17 1615 14 13 12 11 10 9 8 7 6 5 4 3 2
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
1
(+) Parking Lights
Fusebox White 10-pin Connector
4B 3B 2B 1B
5B
6B
7B8B
9B
10B
Brake Switch
1 2
43
(+) Brake
or
(+) Brake
BCM White 15-pin connector
(-) Driver Door Pin(-) Lock/Arm
(-) Unlock/Disarm
Key Port connector
Dimmer Switch
(+) Keysense
ClockData
1
5 6 8
2 3 4
7
1
10 11 12 13
14 15
2 3 4 5 6 7 8 9
Push-to-Start connector
(-) Push-to-Start
1
4 5 6 7 8
32
Brake Switch
1 2
43
(+) Brake
(+) Parking Light
1 2 3
Note: insert pin if wire is not present
Note: insert pin if wire is not present
Note: Only required if the feature
"Parking Light Control On Data" is
disabled.
Note: Only required if the feature
"Parking Light Control On Data" is
disabled.
The Nissan horn beep feature must be enabled for the 3x OEM Lock Remote Start Activation feature to work properly.
Refer to page 11 for more details on horn beep.
Key Port connector
(+) Keysense
ClockData
1
5 6 8
2 3 4
7
Push-to-Start connector
(-) Push-to-Start
1
4 5 6 7 8
32
PTS Wire Pin Keysense Pin Clock Pin Data Pin Brake Pin
Driver Door
Pin
Pin Lock Pin Unlock Pin
Parking
Lights (+)
Pin
Infiniti
M35 2006-2010 Brown/White 4 Brown/Yellow 2 Gray 7 White/Red 6 Pink/Blue 2 Violet 7 (insert pin) 5 (insert pin) 6 Red/Blue 1
Dimmer Switch
Vehicle
PTS Connector Key Port Connector BCM White 15 Pin ConnectorBrake Switch
Brake Switch
1 2
43
(+) Brake
Vehicles Clutch Switch 1 Clutch Switch 2
Infiniti
G25 (Smart Key) 2011-2012 Gray, pin 2 Lt. Blue or Red, pin 2
G35 (Smart Key) 2007-2009 Gray, pin 2 Lt. Blue or Red, pin 2
G37 (Smart Key) 2008-2013 Gray, pin 2 Lt. Blue or Red, pin 2
Nissan
370Z (Smart Key) 2009-2013 Gray, pin 2 Brown, pin 2, or Lt. Blue, pin 1
Altima (Smart Key) 2007-2012 Red/Black or Red, pin 2 Green/Black or White, pin 2
Nissan Altima
Clutch switch 1 & 2
Infiniti G25, G35, G37
Nissan 370Z
Clutch switch 1 & 2
2 1
2
1
Push-to-Start connector
(-) Push-to-Start
1
4 5 6 7 8
32
(+) Keysense
Clock
Data
Key Port connector
1 2 3 5 6
11
7
Brake Switch
1 2
43
(+) Brake
or
(+) Brake
PTS Wire Pin Keysense Pin Clock Pin Data Pin
Driver Door
Pin
Pin Brake Pin
Infiniti
EX35 (Smart Key) 2008-2012 Brown 4 Brown 11 Gray 2 White 3 Lt. Green 39 White 2 or 4
EX37 (Smart Key) 2009-2013 Brown 4 Brown 11 Gray 2 White 3 Lt. Green 39 White 2 or 4
FX35 (Smart Key) 2009-2012 Lt. Blue 4 Brown 11 Gray 2 White 3 Gray 39 White 2 or 4
FX50 (Smart Key) 2009-2013 Lt. Blue 4 Brown 11 Gray 2 White 3 Gray 39 White 2 or 4
G25 (Smart Key) 2011-2012 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray 39 White 2
G35 (Smart Key) 2007-2009 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray or Red 39 White 2
G37 (Smart Key) 2008-2013 Brown 4 Lt. Blue 11 Gray 2 White 3 Gray or Red 39 White 2 or 4
QX70 (Smart Key) 2014 Lt. Blue 4 Brown 11 Gray 2 White 3 Gray 39 White 2 or 4
Nissan
370Z (Smart Key) 2009-2013 Brown 4 Red 11 Gray 2 White 3 Gray 39 White 2
Altima (Smart Key) 2007-2012 Brown 4 Yellow 11 Green/Orange 2 Orange 3 Lt. Blue 39 Lt. Green or Red/Green 2
GT-R (Smart Key) 2009-2012 Brown 4 Red 11 Gray 2 Blue 3 Gray 39 White 2
Maxima (Smart Key) 2009-2014 Brown 4 Yellow 11 Green/Orange 2 Orange 3 Lt. Blue 39 Lt. Green 4
Murano (Smart Key) 2009-2014 Brown 4 Yellow 11 Lt. Blue 2 Orange 3 Lt. Blue 39 Lt. Green 2 or 4
Brake
Switch
Vehicle
PTS Connector Key Port Connector
BCM Green 40
Pin Connector
BCM White 15-pin connector
(-) Driver Door Trigger
1
10 11 12 13
14 15
2 3 4 5 6 7 8 9
Note: insert pin if wire is not present
(-) Driver Door Trigger
BCM Green 40-pin connector
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21
1
Note: insert pin if wire is not present
Vista de página 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários