Directed-electronics Ready Remote Manual do Utilizador descarregar pdf (Página 21)

step 3

Accessory and Starter wires

The starter and accessory wires will be located in the same harness

as the ignition and constant power.

To find the accessory wire leave the LED tester black lead

connected to the metal ground, take the red lead and probe the

wire suspected to be the accessory. With the key off, your test

probe’s LED should be off. Turn the key to the on position and

the LED tester should be illuminated Red. Now turn the key to

the crank position. If you have the correct accessory wire the LED

will extinguish while the starter is cranking and return once the

key returns to the on position. If the wire tests correctly, strip the

➜

87A

+12 VDC CONSTANT (FUSED 20A)

GROUND

PINK/WHITE (+) OUTPUT

TO 2

IGNITION

TO 2

IGNITION

TO 3

IGNITION

IGNITION RELAY

(NOT PROVIDED)

87A

+12 VDC CONSTANT (FUSED 20A)

GROUND

TO 2

IGNITION

IGNITION RELAY

(NOT PROVIDED)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 69 70

Sem comentários

Directed-electronics Ready Remote Manual do Utilizador Página 21