Directed Electronics Automate 210D Instruções de Operação descarregar pdf (Página 127)

Weighing in Percent with Additional Requirements

Changing the Reference Percentage

The reference percentage setting is shown on the application display above

the unit symbol after you have pressed c.

You can change the reference percentage to suit your individual requirements

in one of the following ways:

– Enter a percentage using the numeric keys and store it by pressing F identified

on the display by “STO REF”

– Change the percentage in the parameter mode

To select

the parameter mode: – Hold down i for more than 2 seconds

To select the percentage: – Press ^ - f

If you have made a mistake and need to reset

the percentage, simply press the c key

To store the percentage

– temporarily until you

turn off the balance: – briefly press STO - F

– permanently after you

turn off the power (in the

non-volatile memory): – press STO - F for more than 2 seconds

This setting is not cancelled by the reset code 9 – – 1°!

Reference Percentage

Changing the reference percentage Code

No change 2 3 1

In cycles: 5,10, 20, 50, 100, 5,10, ... 2 3 2*

In increments of one 2 3 3

Storage Parameter for the Reference Weight

(Code only for models MC 210 S (-0CE), MC 210 P (-0CE), MC 410 S (-0CE))

The reference weight is stored Code

with full accuracy according to the internal resolution 3 5 1

according to the display accuracy 3 5 2*

* = factory setting

3–49

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 187 188

Sem comentários

Directed Electronics Automate 210D Instruções de Operação Página 127