Directed Electronics Automate 210D Guia de Instalação descarregar pdf (Página 28)

ooppeerraattiinngg sseettttiinnggss lleeaarrnn rroouuttiinnee

Many of the operating settings of this unit are programmable.

They can be changed whenever necessary through the Operating

Settings Learn Routine™. The Valet

/Program push-button

switch, plugged into the blue port, is used together with a

programmed transmitter to change the settings.

To enter the System Features Learn Routine™:

OOppeenn aa ddoooorr.. ((

The GREEN wire, H1/5, or

the VIOLET, H1/7 must be connected.)

IIggnniittiioonn..

Turn the ignition on, then back off.

(The H1/9 YELLOW switched ignition input

must be connected.)

CChhoooossee..

Within 10 seconds, press and

release the Valet

/Program switch the number

of times for the desired function. Then press the

switch once more and hold it. The siren will

chirp and the LED will flash to confirm the selected channel. Do

not release the Valet

/Program switch.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 54 55

Sem comentários

Directed Electronics Automate 210D Guia de Instalação Página 28