Directed Electronics 554R Guia de Instalação descarregar pdf (Página 21)

uussiinngg yyoouurr ssyysstteemm

active arming

Press for one second to arm the system. The vehicle’s lights

will flash once, the doors will lock, the siren will chirp once, and

while the system is armed, the status LED will blink approxi-

mately once per second to indicate the system is actively

protecting the vehicle.

The transceiver will beep once (or vibrate). The arm icon (29)

will appear and remain displayed on the LCD.

Bypass Notification

If the siren chirps again, the transceiver beeps again, and the status

LED blinks in a pattern, a protected entry or sensor input is active

and its icon will be displayed on the transceiver LCD. This is

called bypass notification. Refer to the Diagnostic section of this

manual for information about bypass notification.

passive arming

The system can be programmed to arm automatically. This is

called passive arming. In passive arming mode the system will

arm itself 30 seconds after the user exits the vehicle and closes all

protected entry points.

Passive arming sequence

1. Turn the ignition off and exit the vehicle.

2. Close all protected entry points (doors, hood, trunk).

➜

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 52 53

Sem comentários

Directed Electronics 554R Guia de Instalação Página 21