Directed Electronics 20095 Guia de Instalação descarregar pdf (Página 43)

2244--hhoouurr ttiimmeerr mmooddee

To enter timer mode, press and simultaneously. The 2-

way remote will produce a melody and the clock indicator will

appear on the remote’s LCD. Once in Timer Mode, the system

will remote start every 24 hours. Repeat this procedure to turn

Timer Mode off.

ddiiaaggnnoossttiiccss

The microprocessor at the heart of your system is constantly

monitoring all of the switches and sensors connected to it. It is

designed to detect any faulty switches and sensors and prevents

them from disabling the entire system. The microprocessor will

also record and report any triggers that occurred during your

absence. Refer to the

System Status Chirps

and

Table of Zones

sections of this guide for diagnostic information.

note: Arming and disarming the system does not reset

this function! The only ways to reset a bypassed zone are

for it to not trigger for 60 minutes, or to turn on the igni-

tion. If testing your system, it is important to remember

that the NPC programming can cause zones to be

bypassed and appear to stop working. If five chirps are

heard when disarming, NPC has been engaged. If you

wish to clear the NPC memory, turn the ignition on.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 56 57

Sem comentários

Directed Electronics 20095 Guia de Instalação Página 43