Directed Electronics DV-POD Manual do Operador Página 103
- Página / 168
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
5•Service
Doc. 065289-03 10/12 93
4. Unscrew the black locking ring
on the front of the valve (see
Figure 5-5
) and remove the
ring.
5. Grasp the front of the valve pod
and pull firmly to remove it
from the Dionex ICS-1100.
Figure 5-5. Unscrew the Valve Locking Ring
6. Check that the new pod (6-port, P/N 061947; 10-port, P/N 061948) has the
correct number of ports for the valve being serviced.
7. Align the slots in the new pod with the runner in the valve holder on the
Dionex ICS-1100 (see Figure 5-6
). Valve pods are keyed to fit only one way
(one slot is narrower than the other). Verify that the slots are aligned with their
matching runners.
8. Also verify that the two splines on the pod align with the matching splines
inside the valve holder (see Figure 5-6
). If necessary, twist the end of the pod
to adjust the position of the splines.
Figure 5-6. Valve Pod and Pod Holder
Black
Locking Ring
Slot (larger)
Splines
Runner (larger)
Valve Pod Valve Holder
- System Operator’s Manual 1
- Contents 3
- Doc. 065289-03 10/12 10
- 1 • Introduction 11
- 2 Doc. 065289-03 10/12 12
- Doc. 065289-03 10/12 3 13
- 4 Doc. 065289-03 10/12 14
- 1.3 About This Manual 15
- 6 Doc. 065289-03 10/12 16
- Appendix E 16
- Glossary 16
- 8 Doc. 065289-03 10/12 18
- 10 Doc. 065289-03 10/12 20
- 2•Features 21
- 2 • Features 23
- 2.1.2 Top Cover 23
- 2.1.3 Component Panel 24
- 2.1.4 Right-Side Panel 27
- 2.1.5 Rear Panel 28
- 2.2 Flow Schematics 30
- and through the 32
- 2.3.1 The Panel Tabset 34
- Doc. 065289-03 10/12 25 35
- 2.4 System Component Details 36
- 2.4.2 Eluent Valve 38
- 2.4.3 Pump 38
- 2.4.4 Injection Valve 40
- 32 Doc. 065289-03 10/12 42
- 2.4.7 Suppressor 44
- 2.4.9 ER Controller 45
- 36 Doc. 065289-03 10/12 46
- 3 • Operation and Maintenance 47
- 3.3 Connecting to Chromeleon 50
- 3.4.1 Prepare the Eluent 52
- 3.4.2 Degas the Eluent 52
- 3.4.3 Filter the Eluent 53
- 3.4.4 Fill the Reservoir 53
- 3.4.5 Set the Eluent Level 53
- 3.5 Check All Connections 54
- 3.6 Prime the Pump 55
- 3.9 Prepare Samples 57
- 3.9.2 Pretreating Samples 58
- 3.9.3 Diluting Samples 58
- 50 Doc. 065289-03 10/12 60
- 3.11 Processing Samples 62
- 54 Doc. 065289-03 10/12 64
- 3.12 Maintenance 65
- 58 Doc. 065289-03 10/12 68
- 4 • Troubleshooting 69
- 62 Doc. 065289-03 10/12 72
- 64 Doc. 065289-03 10/12 74
- 66 Doc. 065289-03 10/12 76
- 4.3 Liquid Leaks 78
- Doc. 065289-03 10/12 69 79
- 70 Doc. 065289-03 10/12 80
- Doc. 065289-03 10/12 71 81
- 4.5 Pump Does Not Start 82
- 4.6 No Flow 82
- Doc. 065289-03 10/12 73 83
- 4.9 Peak “Ghosting” 84
- Doc. 065289-03 10/12 75 85
- 4.12 No Cell Response 86
- 4.13 High Cell Output 86
- • Wrong eluent 87
- • Cell out of calibration 87
- 4.14 Baseline Noise or Drift 88
- • Damaged piston seal 89
- • Monitor 90
- Doc. 065289-03 10/12 83 93
- ELUENT OUT port to the cell 94
- REGEN IN port to the cell 94
- Items Needed Description 94
- L (1) and 100
- L (4) on the injection valve 100
- 5•Service 101
- 94 Doc. 065289-03 10/12 104
- or Figure 5-9) 108
- 5.8 Replacing a Pump Piston 111
- 102 Doc. 065289-03 10/12 112
- 104 Doc. 065289-03 10/12 114
- 5.11 Replacing the Suppressor 116
- 108 Doc. 065289-03 10/12 118
- 110 Doc. 065289-03 10/12 120
- Figure 5-18. Eluent Valve 120
- 112 Doc. 065289-03 10/12 122
- Figure 5-21. Leak Sensor 122
- 5.16 Priming the Pump 123
- 114 Doc. 065289-03 10/12 124
- 118 Doc. 065289-03 10/12 128
- A • Specifications 129
- A.3 Environmental 130
- A.4 Front Panel 130
- A.6 Eluent Regeneration 132
- A.7 Detector 132
- Electronics 132
- A.9 Injection Valve 133
- (Optional) 134
- A.13 Suppressors 135
- A.14 Autosampler 136
- A.15 System Software 136
- B • TTL and Relay Control 139
- 130 Doc. 065289-03 10/12 140
- Connecting a TTL or Relay 140
- 132 Doc. 065289-03 10/12 142
- TTL Input Control Types 142
- Normal Edge, is compatible 142
- 134 Doc. 065289-03 10/12 144
- C • Reordering Information 145
- heated conductivity cell 146
- Part Number Item 146
- 138 Doc. 065289-03 10/12 148
- D.2 How do I print? 149
- 140 Doc. 065289-03 10/12 150
- D.13 How do I clean a column? 151
- 142 Doc. 065289-03 10/12 152
- E • Glossary 153
- 144 Doc. 065289-03 10/12 154
- 146 Doc. 065289-03 10/12 156
- 148 Doc. 065289-03 10/12 158
- Backpressure, 30 159
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.035 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais