Directed Electronics 450 Manual de Instruções descarregar pdf (Página 11)

disarming without a transmitter

This feature allows you to disarm the system without the transmitter

should it be lost, damaged, or disabled. In order to disarm without a

transmitter, you must have the vehicle’s ignition key, know where the

PlainView 2 Valet switch is located, and have the PIN code. Be sure to

check with the installer for the location of the PlainView 2 Valet switch.

Please refer to the Disarm/Valet Mode section of this guide for instruc-

tions to enter the pin code.

remote siren silencing

This system offers remote siren silencing. Remote siren silencing is a fea-

ture that makes it possible to silence and reset the system when it is

triggering without disarming the system. If the system is triggered and

the siren has been sounding, press on the transmitter to stop the

trigger and return the unit to the armed state. The system will not dis-

arm, but rather reset. This prevents you from disabling the system

should you wish to silence it without visually checking the vehicle. After

resetting the system, press again to disarm the system.

transmitter chirp muting

To temporarily turn off the arm or disarm chirps, use transmitter chirp

muting. Simply press and on the transmitter, and the

confirmation chirp(s) will be eliminated for that one operation only. The

parking lights will flash to confirm the arm/disarm command. If you

want the arm/disarm chirps turned off permanently, please refer to the

User-Selectable Features section of this guide.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Sem comentários

Directed Electronics 450 Manual de Instruções Página 11